Carbide Burr, Uncoated, Cut 6 – Double Cut, 6.3mm, Round Tree

Pointed Tree.
All sizes are nominal with a 6mm shank unless other wise stated.

Cut Numbers:

Cut 6 – Double Cut.
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.

Please note:
• Work piece and tools should always be steady and well supported.
• Carbide burrs are not suitable for ‘milling’ large amounts of material, they are for light stock removal and high revolutions ‘LOW FEED – HIGH SPEED’.
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
• Always ensure that the tool is rated to the recommended operating speed of the burr.