DP2610, Air Drill, Air, 2600rpm, Keyed, 1 to 10mm, 1/4in., 447W

DP2610
10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears

Air inlet thread: 1/4″ NPT.
Minimum air hose size (ID): 3/8″(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8″ – 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4cfm* (113 ltr/min).
Sound pressure level: 100dBA.
Sound power level: 103dBA.
Vibration level: 2.5m/s2.
Overall length: 180mm.

*Based on a 15 second cycle per minute average use.